Сообщение #8056

[C0va]

вывернуто все на всю... звука нет... регулировал уже и горячими клавишами, полоска уровня бегает, а звука нет....
насчет wi-fi:
Others benefit from detailed feedback, so you get bonus points if you provide all of the following in your notes:
    *Machine Brand and Model
    *Wireless Brand and Model (please post the whole line): lspci | grep Broadcom
    *Wireless Chipset: lspci -n | grep '14e4:43'
    *Ubuntu Version: lsb_release -d
    *Kernel/architecture (including 32 vs. 64 bit) : uname -mr
    *Any extra boot options you might be using (e.g., noacpi, irqpoll, etc.)
    *Whether or not you had to compile NDISWrapper

Step 1: All BCM43xx - Install NDISWrapper and Blacklist Native Driver
   echo 'blacklist bcm43xx' | sudo tee -a /etc/modprobe.d/blacklist
   sudo apt-get install ndiswrapper-utils-1.9
   mkdir ~/bcm43xx; cd ~/bcm43xx

Step 3: All BCM43xx - Configure NDISWrapper (and WPA Supplicant)
sudo ndiswrapper -i bcmwl5.inf
ndiswrapper -l
sudo depmod -a
sudo modprobe ndiswrapper
sudo cp /etc/network/interfaces /etc/network/interfaces.orig
echo -e 'auto lo\niface lo inet loopback\n' | sudo tee /etc/network/interfaces
sudo ndiswrapper -m
echo 'ndiswrapper' | sudo tee -a /etc/modules
echo 'ENABLED=0' | sudo tee -a /etc/default/wpasupplicant

Now, REBOOT.

After rebooting, you should be able to click the network manager icon. (In Gnome, it looks like two black monitors overlapping each other on the top panel.) Hopefully, you'll see the available wireless access points under "Wireless Networks" and your machine ought to try to connect to one of them if you remove your network cable (or if you select one of them with a mouse click).

шаг 2 пропущен, т.к. там вариант со скачкой исходников дров. После перезагрузки в настройках беспроводного адаптера должно стоять "роуминг", т.е. на точке должен быть поднят DHCP. по крайней мере я сделал так, чтобы больше не ломать голову
чип  BCM4318 (rev 02)  14e4:4318 (rev 02)